A numerical investigation of airfoil tonal noise reduction by roughness elements

Abstract

© The Author(s), 2025. Published by Cambridge University Press. This is an Open Access article,In a combined experimental and numerical effort, we investigate the generation and reduction of airfoil tonal noise. The means of noise control are streak generators in the form of cylindrical roughness elements. These elements are placed periodically along the span of the airfoil at the mid-chord streamwise position. Experiments are performed for a wide range of Reynolds numbers and angles of attack in a companion work (Alva et al., AIAA Aviation Forum, 2023). In the present work, we concentrate on numerical investigations for a further investigation of selected cases. We have performed wall-resolved large-eddy simulations for a NACA 0012 airfoil at zero angle of attack and Mach 0.3. Two Reynolds numbers (0.8 × 105 and 1.0 × 105) have been investigated, showing acoustic results consistent with experiments at the same Reynolds but lower Mach numbers. Roughness elements attenuate tones in the acoustic field and, for the higher Reynolds number, suppress them. Through Fourier decomposition and spectral proper orthogonal decomposition analysis of streamwise velocity data, dominating structures have been identified. Further, the coupling between the structures generated by the surface roughness and the instability modes (Kelvin–Helmholtz) of the shear layer has been identified through stability analysis, suggesting stabilisation mechanisms by which the sound generation by the airfoil is reduced by the roughness elements.

Keywords