Effect of gas residence time on the morphology of silicon surface etched in SF 6 plasmas

Resumo

This paper describes the effect of the SF 6 gas residence time on the morphology of silicon (1 0 0) samples etched in a reactive ion etching system. Profilometry and atomic force microscopy techniques were used to characterize the etching process focusing attention on the evolution of the surface morphology. Under the condition of variable pressure and gas flow rate, the decrease of the residence time leads to an increase of the silicon etch rate concomitantly with an increase of the surface roughness. Contrary fact is observed when the gas flow is fixed and the pressure is varied. Here, the increasing of residence time leads to a constant increase of silicon etch rate with small variations in final surface roughness. To better understanding this resident time effect, mass spectrometry analyses were realized during the discharge for both gas flow conditions. © 2008 Elsevier B.V. All rights reserved.

Palavras-chave